Patek Philippe 324 S QA LU Mode D'emploi page 18

18
date correction
Proceed as follows to correct the date:
1. MAKE SURE to set the date to the first day of
the month.
2. First, correct the month with the push piece at
2 o'clock as described below.
3. Then, correct the date by repeatedly actuating
the push piece at 4 o'clock until the current
date is displayed.
month correction
To correct the month, actuate the correction push
piece at 2 o'clock as many times as needed to
display the current month.
day of week correction
To correct the day of the week, actuate the push
piece at 10 o'clock as often as needed to display
the correct day.
-
moon phase correction
The moon­phase display advances in the morn­
ing. Its mechanism is active between 9 and 11 a.m.
Each time the push piece at 8 o'clock is actuated,
the moon­phase disk will advance by one day.
To begin the correction procedure, advance the
moon­phase disk until a full moon is displayed
in the middle of the aperture. Consult a moon­
phase calendar or visit www.patek.com (click
on › Collection
moonphase indicator) to find out how many days
have elapsed since the last full moon (including the
day on which you correct the display). To correctly
set the moon­phase display, press the push piece as
many times as the number of days that have elapsed
since the last full moon.
› Movements­Complications › The