The Menu Navigation Of Your Rangefinder - Minox X-range Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

Inserting or replacing the battery

Open the battery compartment by turning the cover with a tool

or a coin to the left (counterclockwise). Insert a CR2 battery

with the positive end into the shaft. The negative pole is now

towards the battery cover. Then carefully screw the cover back

on (clockwise) as far as it will go. Always pay attention to use

only a CR2 battery. If you do not use the binoculars for a longer

period of time, remove the battery to prevent leakage.

Batterie Warnung

The CR2 battery has enough power for about 4,000 measure-

ments made at an average temperature of 20° Celsius. If the

battery charge is lower than 20%, the battery symbol will blink

three times after activating the display. You can continue using

the binoculars, but you should replace the battery as soon as

possible.

Attaching a tripod

For a shudder-free image, we recommend using a tripod, espe-

cially with binoculars with higher magnifications. The MINOX

tripod adapter is available as an optional accessory for this

purpose.

Remove the screw cap on the bottom of the binoculars and

attach the MINOX tripod adapter into the tripod socket. Keep

the screw cap in a safe place and reattach it after removing the

tripod adapter.

The correct diopter settings for the display

Activate the display by pressing the measuring button. Now

turn the diopter compensation to the left or right until you

have acquired the desired setting and until you can see the

display sharply.

Focusing

For the best possible image sharpness, you must adjust the op-

tics of the binoculars to match your individual vision. To do this,

please proceed as follows:

1. First, look at a stationary object in the distance. With the left

eye closed, turn the focusing knob until the object in view

has become perfectly sharp. The display and the object are

now in perfect focus.

2. Next, look at the same object in the distance with the right

eye closed and turn the diopter adjustment ring on the left

eyepiece until the object is perfectly sharp.

3. Your MINOX binoculars are now set to the individual vision

for both eyes.

4. When observing objects at various distances, you will have

to refocus accordingly. Simply use the focus adjustment

knob to obtain a clear and sharp image.

DANGER!

Do not use binoculars to look into the sun. This could lead

to irreparable eye damage.