EXPLANATION OF SYMBOLS & SAFETY INSTRUCTIONS
This instruction manual is part of the MINOX Laser Rangefinder
X-range 10x42 (hereinafter named only "X-range" or "binocu-
lars"). It is part of the product and contains important informa-
tion on commissioning, handling and disposal. Please carefully
read the operating instructions, especially the safety instruc-
tions, before using the binoculars for the first time. Non-com-
pliance with these operating instructions can cause damage
to the binoculars. The operating instructions are based on the
standards and rules applicable within the European Union. Ob-
serve also country-specific guidelines and laws if used outside
the EU! Keep the operating instructions for the further use. If
you pass the X-range binoculars on to a third party, be sure to
include this user manual. Use the binoculars only as described
in this manual. Any other use is considered improper and can
lead to material damage. The manufacturer or dealer assumes
no liability for damage caused by improper or incorrect use, and
for unauthorised modifications.
We have made every effort to ensure that these operating in-
structions are as complete and accurate as possible. Neverthe-
less, it cannot be guaranteed that errors or omissions will not
have occurred during the printing process. The accessories in-
cluded in the delivery may differ slightly from those described.
This package can be changed without prior notice.
24
24
The following symbols and signal words are used in these op-
erating instructions, on the device or on the packaging.
DANGER!
This symbol/signal word indicates a hazard with a high
degree of risk, which if not avoided, will result in death or
serious injury.
WARNING!
This signal word warns of possible damage to property.
NEVER look directly at the sun or into laser sources
with your binoculars. This can cause irreparable
damage to the eyes.
Be sure not to allow your binoculars to get into the
hands of children. There is a danger of swallowing
small parts or strangulation caused by the carrying
strap.
Do not touch metallic surfaces if the binoculars
have become very hot or very cold.
Always replace the protective caps after use. This
protects the lenses from damage and can avoid fire
hazard caused by the bundling of sunlight through
your binoculars.
Additional safety instructions regarding the laser and batteries
The product implements an invisible laser beam. Please pay
attention to the following:
Do not point the laser at eyes
Do not point the laser at people
Do not look into the laser with optical devices
Remove your finger from the measuring button when you
are not measuring. This will prevent accidental activation of
the laser.
DO NOT disassemble, alter or repair the binoculars yourself.
The laser can be hazardous to your health.
WARNING
This product has been tested to meet the following standards:
CLASS 1 LASER PRODUCT.
INVISIBLE LASER RADIATION. NEVER LOOK WITH OPTICAL DE-
VICES INTO THE LASER. (BINOCULARS, TELESCOPES)
This device complies with the regulations for laser class 1 in
accordance with applicable standards IEC 60825-1:2007 Edi-
tion 2 (TÜV SÜD), EN 60825-1:2007 and CE according to EN
61326-1:2013.
This product complies with the regulations according to the
FDA 21 CFR 1040.10 and 1040.11, and meets the requirements
of FDA performance standards and the FCC Rules and Regula-
tions section 15 B:2018 using the test method ANSIC63.4-2014.
The operation of the device is subject to the following restric-
tions:
(1) This device may not cause harmful interferences, and (2) this
device must allow the reception of any interferences, including
those that may cause undesirable operation.
MINOX GmbH, Ziegelstadel 20, 88316 Isny, Germany
CR2 lithium battery safety instructions
Make sure that the polarity is correct when inserting the
battery (+/-)
Do not attempt to charge the battery
Do not throw the battery into fire or water
Do not disassemble the battery
When discarding the battery, please observe applicable laws
25
25