Sony DXC-950P Mode D'emploi page 16

Location and Function of Parts and Controls
3
FLASH (sync) connector
Connects to a flash slave unit when the camera is in the
flash mode.
4 BARS (color bars output) button
Pressing this button for one second outputs the color bars
signal. Press again to revert to video signal output.
For monitor adjustment, contact your authorized Sony dealer.
5 MENU (menu recall) button
Pressing this button for one second brings up the
operational settings menu on the monitor connected to the
camera. Press again to hide the menu.
For menu operation, see "Changing the Camera Settings" on
page 33.
6 FUNCTION UP/DOWN (cursor up/down) buttons
UP button: moves the menu cursor upwards.
DOWN button: moves the menu cursor downwards.
16
7 DATA DOWN (setting value reduction)/
(flash) button
With the menu displayed: decreases the setting value.
With the menu hidden: activates the flash button when in
the flash mode.
8 DATA UP/
WHITE (setting value increase/
white balance adjustment) button
With the menu displayed: increases the setting value.
With the menu hidden: activates the automatic white
balance adjustment function when the camera is in the Auto
mode.
9 LENS connector (6-pin)
Connects to a lens cable when a
This connector is not used for
0 CCU (camera control unit) connector (20-pin)
Connects with the CCU-M5P camera control unit (not
supplied).
You cannot use the CCU-M5P and the RM-C950 (not
supplied) at the same time.
2
/ -inch zoom lens is used.
3
1
/ -inch zoom lenses.
2