Checking For Blockages - shark ROTATOR NV682 Mode D'emploi

MAINTENANCE
To keep your vacuum's suction power optimal, follow these instructions.
Make sure unit is off and cord unplugged.
STEP 1
CHECK FOR BLOCKAGES
1 Use a coin to unlock the 3 locks on the
bottom of the floor nozzle.
11
STEP 2
2 A portion of the base is removable to
allow for better access to the brushroll
and exposure to the airway. Shine a
flashlight from the bottom to check for
possible blockage in the airway.
w w w . P o w e r e d L i f t A w a y. c o m
STEP 3
3 Remove any string, carpet fibers or
hair that may be wrapped around
the brushroll. There is a groove on
the brush bar that allows a pair of
scissors to cut across it to loosen
up the debris.
STEP 4
4 To reassemble, replace base by
lining it up along the front of the
nozzle. Push down to snap into
place. Lock the 3 locks.