Cleaning The Brushroll; Cleaning The Soft Roller; Checking The Nozzle For Blockages - shark APEX duo clean Powered Lift-Away AX952 Serie Instructions

MAINTENANCE - continued
WARNING: To reduce
the risk of shock and
unintended operation,
turn off power and
unplug unit before
servicing.
TIP: You can also check
for blockages in the hose
and tubes. Just remove
the floor nozzle, dust cup,
and hose and shine a
flashlight in the openings.

CLEANING THE BRUSHROLL

1
To open the brushroll garage, slide both release buttons
on the floor nozzle away from you, towards the back of the
nozzle, then lift off the brushroll garage lid.
2 To remove any string, hair or debris that may be wrapped
around the brushroll, use scissors to cut along the groove in
the brushroll.
3 To close the brushroll garage lid, insert the 3 tabs on top of
lid into the 3 slots in the nozzle, then push down on both
sides of lid until it clicks securely into place. If Brushroll
Indicator Light isn't green and headlights are flashing, check
again that both sides of lid are locked in place.
21
1-800-798-7398
STEP 1 STEP 2

CLEANING THE SOFT ROLLER

1
To remove Soft Roller from nozzle, lift it out
by the pull tab.
2 You can also tap loose debris off the Soft
Roller, or wipe it clean with a dry towel. If
you see any hair buildup or fibers caught in
the teeth behind the Soft Roller, wipe clean
with a dry towel.
3 Wash the Soft Roller as needed. Use only
water, and let air-dry completely for at least
24 hours.
4 Reinsert Soft Roller under rubber bumper in
front of nozzle until it clicks into place.

CHECKING THE NOZZLE FOR BLOCKAGES

1
Tilt neck of nozzle back to straighten the
airway, then remove any blockages.
s h a r kc l e a n . c o m
22