Soft Roller; Checking For Blockages - shark Rocket HV380 Série Manuel D'instructions

MAINTAINING THE SOFT ROLLER
Slide the Soft Roller access button up to
1
remove the Soft Roller.
2 Use the onboard hair removal tool to
remove any string, carpet fibers or hair that
may be wrapped around the Soft Roller.
The tool is located in a compartment on the
nozzle, above the brushroll. You can also
tap loose debris off the Soft Roller, or wipe it
clean with a dry towel. If you see any fibers
or hair buildup in the teeth behind the Soft
Roller, take a dry towel and wipe it away.
3 Wash the Soft Roller as needed. Use only
water, and let air-dry completely for at least
24 hours.
4 Reinsert the Soft Roller by sliding it into the
front of the nozzle until it clicks into place.

CHECKING FOR BLOCKAGES:

HANDHELD, WAND, AND FLOOR NOZZLE
Remove the wand from the handheld
1
portion and check all dust cup intake
openings.
Remove the floor nozzle from the wand
2
and check the wand for blockages.
Tilt neck of floor nozzle back to straighten
3
the airway. Remove blockages.
s h a r kc l e a n . c o m 20