Checking The Nozzle For Blockages - shark Lift-Away NV800C Serie Instructions

SOFT ROLLER
1
Slide the Soft Roller access button up to
remove the Soft Roller.
2 Use the onboard hair removal tool to
remove any string, carpet fibers or hair that
may be wrapped around the Soft Roller.
The tool is located in a compartment on the
nozzle, above the brushroll. You can also
tap loose debris off the Soft Roller, or wipe it
clean with a dry towel. If you see any fibers
or hair buildup in the teeth behind the Soft
Roller, take a dry towel and wipe it away.
3 Wash the Soft Roller as needed. Use only
water, and let air-dry completely for at least
24 hours.
4 Reinsert the Soft Roller by sliding it into the
front of the nozzle until it clicks into place.

CHECKING THE NOZZLE FOR BLOCKAGES

1
Tilt neck of nozzle back to straighten the
airway. To clear a blockage, insert a long
object such as a wooden spoon into the
nozzle connector.
s h a r kc l e a n . c o m
22