Safety Features; Electrical; Nemko Mark Label; Other Symbols - Qualigen FastPack IP System Manuel

Safety Features

Electrical

The FastPack IP Analyzer must be connected to a properly grounded outlet.
®

Other Symbols

All symbols discussed on this page can be found on the inside door plate of the FastPack
2 6 5000159 R ev. 0 07 ( 06/15)

Nemko Mark Label

The application of the Nemko mark denotes that the FastPack
all requirements for electrical safety and is approved for use in the field.

Biomedical Label

This symbol indicates the area in the analyzer that may contain potentially
infectious human serum or blood products. Healthcare personnel should always
wear disposable gloves when handling blood products. Adhere to state and
federal infection control guidelines. All blood specimens should be handled at the
Biosafety Level 2 as recommended for any potentially infectious material in the
Centers for Disease Control/National Institutes of Health manual, "Biosafety in
Microbiological and Biomedical Laboratories," 1988.

Attention Label

Attention: Important information that must be read is located both in the
Procedure Manual as well as in the directional inserts for all assays performed on
the FastPack IP System.
®

CE Mark Label

This label signifies that the FastPack
IP System conforms with all applicable health, safety and environmental
protection standards of the European Union.

IVD Label

The FastPack IP System is an In vitro diagnostic medical device.
®
®
IP System meets
®
IP Analyzer.
®