Skoda 5L0 063 521 A Notice D'utilisation page 10

Les langues disponibles

Explanations to the pictures:

Fig No. 1 – Set parts list

Part name

DVD player

Auxiliary video monitor without DVD drive

Holder of DVD player/auxiliary video monitor

Remote controller

Earphones AHR-001

Connecting cable (3.5 mm Jack / 3 x CINCH)

Feeder adapter 230 V for the standard of EU A-V

Tool bag

User's Manual

Bolt M3

Assembly Instructions

Caution:

In addition to the Assembly Instructions, the package contains a User's Manual as well.

Information contained in these Instructions and Manual may partly differ. The informa-

tion provided in these Assembly Instructions take priority over the information stated in

the User's Manual.

Fig No. 2

Mounting the DVD player into the holder.

– 2.1 Mount two M3 bolts into the upper nuts in the player's rear cover and tighten them

carefully using a screwdriver. If the DVD player / auxiliary video monitor contains

connector caps in its bottom part, remove the caps.

– 2.2 Insert the device into the holder so that the bolts fit into grooves J1 and J2.

– 2.3 Secure the payer with the hold-down bolt on the bottom part of holder. When as-

sembling the device and holder use adequate force to push the DVD device while

tightening the hold-down bolt.

– Use the same method to assemble the auxiliary video monitor and the other holder.

Fig No. 3

Connection of AV connector.

Connect the K connector into the AV OUT slot of the DVD player. In the other holder

with the auxiliary video monitor, connect the K connector with the AV IN slot.

Fig No. 4

Connection of cables into the connectors in the back rest.

Connect the DVD player holder's connectors L1 and L2 into the slots in the back rest and

lead the cables upwards. Use the same method to connect the connectors of the holder

for the auxiliary video monitor.

Position

Pieces