cecotec CONGA 3890 ULTRA Manuel D'instructions page 22

ENGLISH
App advantages:
Control your robot in an easy and intuitive way.
Activate the cleaning process from any point.
Carry out settings and daily scheduling.
Choose between its different cleaning modes: Auto, Spiral, Edge, Manual, Twice, Restricted
area, Spot, Smart area, Back home or Scrubbing.
View how the robot creates an interactive map as it is cleaning.
Manage rooms smartly through its Room Plan function, which allows you to join, separate or
name rooms. Plus, create and schedule your own cleaning plans by selecting the rooms you
want to clean, the mode and power level.
Check the cleaned surface and the time taken.
Check the cleaning history.
The App supports 5 GHz networks.
* This model is compatible with voice virtual assistants Google Assistant and Alexa
Configuration:
Download the Conga 3000 App from App Store or Play Store.
Fig. 23.
Create an account with your e-mail and a password.
Confirm login.
Add your Conga robot.
Connect to Wi-Fi.
Warnings:
The Wi-Fi name and password cannot exceed 32 bits.
If the network configuration fails to connect, follow the steps below:
Press the power button for 5 seconds, the robot will enter sleeping mode and the Wi-Fi
light indicator will blink fast indicating connection error. Retry connecting the robot again
following the steps in the before section.
If the connection fails again, check if:
a. The robot is too far away from the router.
b. The Wi-Fi password is incorrect.
The following modes can be activated from the App:
Auto mode
Select this mode for the robot to clean 4x4 m quadrants. Within this space, it will carry out a
first cleaning cycle in Edge mode and then in zigzag motion to complete the surface. Once it
has finished, it will directly return to the charging base.
It can be activated from the App or the remote control.
Note: The robot could leave the room to complete the cleaning cycle in some of the
quadrants. This will not affect the robot's operating, do not worry.
40
3890
Edge mode
Select this mode for the robot to clean along walls and furniture.
It can be activated from the App or the remote control.
Spiral mode
When this mode is selected, the robot will start cleaning in a specific point, and then will
clean carrying out moves in spiral motion outwards.
It can only be activated from the App.
Scrubbing mode
When this mode is activated, the robot moves in a swaying motion, simulating real scrubbing
moves. It starts off cleaning in Edge mode, then in zigzag motion and finally returns to the
charging base taking the straightest way back home.
It can only be activated from the App.
Manual mode
To carry out manual cleaning, use the direction buttons on the remote control or on the App
to take the robot to the specific points where you want it to clean.
It can be activated from the App or the remote control.
Back home mode
Select this mode at any point of any cleaning cycle and during any of the modes, the robot
will automatically return to the charging base.
It can be activated from the robot, the remote control or the App.
Smart Area mode
Once the home's map has been saved, select this mode for the robot to clean a specific area
in zigzag motion. The robot will clean the selected area and then will return directly to the
charging base. You can set more than 1 area at the same time. The robot will only clean the
area selected in the map; therefore it will go to the point and return to the base without
vacuuming.
It can only be activated from the App.
Spot mode
Select this mode if you want to thoroughly clean a specific point in the map, making the most
of the robot's maximum power. The robot will clean a 2x2 m zone in zigzag motion and then
will return directly to the charging base when cleaning is completed. The robot will only clean
the area selected on the map; therefore it will go to the point and return to the base without
vacuuming.
It can only be activated from the App.
ENGLISH
41
3890