3-Digit Led Display - Vogel KFA Instructions De Service

5.1 3-digit LED display

During normal operation, the display is off. It is
activated by briefly operating one of the two
pushbuttons . It is used for displaying
current values and preset parameters. In addition,
the display is used for operator prompting during
programming of operating parameters.
Display Function
t = TIMER The control unit operates as a time-
PA = PAUSE controlled contact maker (TIMER)
and is in the PAUSE mode
c = COUNTER The control unit operates as a
PA = PAUSE contact counter (COUNTER)
and is in the PAUSE mode
t = TIMER The control unit operates as a time-
CO = CONTACT controlled contact maker (TIMER)
and is in the pump running mode
(CONTACT)
c = COUNTER The control unit operates as a
CO = CONTACT contact counter and is in the pump
running mode (CONTACT)
Special application! Not to be
used for KFA / KFAS units
C = Cycle Display of beginning of menu
O = OFF „Monitoring settings"
P = Pressure
Page 23
Next Chapter
5
Operating Instructions KFA, KFAS
Description
•
Part of lubrication cycle
Entered and displayed value
in hours
•
Part of lubrication cycle
•
The device counts the pulses
from an external contact maker
and compares them with the
preset values
•
CONTACT = time during which
the pump delivers
•
Entered and displayed value
in minutes
•
CONTACT = time during which
the pump delivers
Entered and displayed value
in pulses