Permitted lubricants
Greases up to NLGI grade 2 DIN 51818 and a
flow pressure of 700 mbars maximum.
The release list of permitted lubricants is updated
on an ongoing basis and is available from the
following address:
„Schmierstoffe für Progressivanlagen"
(Lubricants for Progressive Systems) at:
www.vogelag.com
Also refer to the release lists of the
machine or vehicle manufacturers!
Hazard to the environment posed by lubricants
The lubricants recommended by the manufacturer
have been formulated to meet the relevant safety
regulations. Oils and greases nevertheless
principally continue to be substances hazardous
to ground water, and special precautions shall be
taken for their storage, processing and
transportation.
Transport and storage
The pump units KFA and KFAS are packed in
conformity with standard packaging practice such
that the regulations in the country of destination
as well as DIN ISO 9001 are met.
There are no limitations with respect to land, air
or sea transport. Store in a dry place at a storage
temperature of -40 °C to +70 °C.
Handle with care!
This symbol appears in the manual
whenever it is necessary to draw your
attention to special dangers or important
actions.
Page 7
Contents
Chapter
1
Operating Instructions KFA, KFAS