Juiceman JM3000 Mode D'emploi page 9

6. The juice extractor has one speed to ensure smooth and
consistent results.
7. When you are finished juicing, turn the dial counterclockwise to (0) OFF.
8. Turn the anti-drip spout clockwise to prevent any spills.
9. Remove the pulp container from the base to repurpose the pulp or
clean it out.
Note:
You may need to empty the pulp container during juicing. Make sure
to turn off the juicer before removing the container and washing before
beginning to juice again.
10. Enjoy your fresh juice or add additional ingredients to blend!
DISASSEMBLING YOUR
JUICE EXTRACTOR
Step1:
Make sure the juicer is off and unplugged.
Remove the easy-grip pulp container from
the motor base by sliding the bottom out
and pulling away from the underside of lid.
Note:
Make sure the anti-drip spout is in the closed position.
Step 2:
Remove the entire top assembly as one piece (the
lid, pulp separator and filter basket) to prevent pulp
from falling. When this is done, the filter basket will
automatically release within the pulp separator for
disassembly.
Step 3:
Take entire top assembly to the sink to
disassemble and clean.
Step 4:
Remove food pushers.
Step 5:
Remove lid by holding anti-drip spout and turning lid
counterclockwise to unlock.
Step 6:
Carefully lift filter basket out of pulp separator.
Step 7:
Wash all parts as instructed in
CARE & CLEANING section
9