Juiceman JM3000 Mode D'emploi page 8

ASSEMBLING YOUR JUICE EXTRACTOR
USING YOUR JUICE EXTRACTOR:
1. Plug in the juicer and prepare your ingredients.
2. Turn the dial clockwise to turn on the juicer.
3. Place your produce in the wide mouth feed chute.
4. Guide the produce towards the filter basket using the
appropriate food pusher.
Step 1:
With motor on a flat surface, place pulp
separator on motor base, aligning the tabs and
turning clockwise to lock in place.
Step 2:
Grab filter basket by the outer rim and place into
pulp separator, pushing down to lock in place.
Note:
Use caution when handling filter basket as
blades may be sharp.
Step 3:
Place lid on top of pulp separator, aligning tabs
and turning clockwise to lock in place.
Step 4:
Slide the pulp container under the lid: first place the
opening under the lid at an angle and then slide the
bottom in towards the base.
Step 5:
Place juice cup or your own container under the
anti-drip spout. Open the anti-drip spout by turning
counterclockwise and you are ready to juice!
5. When juicing smaller ingredients, we
recommend placing ingredients in the large
food pusher and guiding the produce with the
small pusher.
a. To separate the large pusher from the small pusher,
hold the large pusher in one hand and turn the small
pusher counterclockwise.
b. To assemble the pushers, place the small pusher into
the large pusher and turn clockwise.
8