Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Overheat protection system: This juicer contains a PTC overheat
protection system. When the appliance is being operated for too long
or with too much load, the PTC protector will shut down the power of
the appliance to protect the unit. If the power shuts down, unplug for 15
minutes and plug back in for normal operation.
problem
Appliance will
not start when
speed dial is
turned on
The motor of
the appliance
seems to be
struggling
The juice
extractor
has stopped
producing
juice
Omega-3 essential fatty acids, Vitamin E, iron
Try roasted, salted or sweetened for a different
flavor in your smoothie or juice.
Iron, Magnesium, Flavonoids
Add cocoa powder to a protein shake for rich
flavor and a boost of energy.
Possible cause
The juicer may
not be assembled
correctly.
Pulp container may
be full.
Pulp may have
collected under the
cover.
The anti-drip spout
may be closed.
The integrated pulp
container or the
stainless steel filter
may be blocked.
Solution
Turn the juicer off and
unplug. Make sure
everything is properly
attached and parts are
clean and free of food
remnants.
Turn the appliance off and
empty the pulp container.
Remember, the pulp container
holds about 2L of pulp, do not
allow to get too full.
Turn off and unplug. Remove
the lid and wash thoroughly.
Return lid to appliance.
Check to see if the spout is
closed or open.
Turn appliance off and
unplug. Disassemble the
juicer, wash all parts
thoroughly and re-assemble.
22
Publicité
Table des Matières
