Juiceman JM3000 Mode D'emploi page 16

ASSEMBLING YOUR CITRUS JUICER
USING YOUR CITRUS JUICER:
1. Prep your citrus fruits by cutting them in half.
2. Place blending cup or other container below juicing spout.
3. Turn anti-drip spout counterclockwise to open.
4. Place citrus fruit face down on top of the juicing cone
a. The unique design of the citrus cone allows you to juice small and
large citrus without switching cone sizes.
5. Turn the dial clockwise to 1 (ON) and press fruit firmly down.
6. When finished juicing, turn the dial counterclockwise to 0 (OFF) and
unplug juicer.
7. Turn the anti-drip spout clockwise to close.
Tip:
Use the zest of your citrus peel to flavor cocktails and baked goods!
Step 1:
Place the motor base on a flat stable surface.
Place the citrus juicer gear reduction on the motor
base pressing down firmly to secure.
Step 2:
Place the citrus juicer pulp container over
the gear reduction on the motor base and twist
clockwise to lock. You will hear a click.
Step 3:
Place strainer on top of gear reduction in the
pulp container.
Step 4:
Place the dual-purpose juicing cone on top of the
strainer, pushing down to secure in place. You are now
ready to juice!
16