2. Screw the blending blade base onto the cup by turning clockwise.
Caution:
Handle blade base carefully as blades are sharp.
3. Place the blending cup on the base and turn clockwise to secure.
4. Turn the dial to 1 (ON) to begin blending or turn the dial
counterclockwise to pulse and chop.
5. When you are done juicing, turn the dial to 0 (OFF) and unplug
the juicer.
6. Hold the base and turn the blending cup counterclockwise to unlock.
7. Flip the cup so the blade base is pointing up and unscrew the blade
base by turning counterclockwise.
8. Place the blending cup travel lid onto the blending cup and tighten
by turning clockwise.
9. You can now enjoy your freshly blended beverage or take it on the go!
DISASSEMBLING YOUR BLENDER
Step 1:
Unplug your juicer
Step 2:
Turn the cup and blade base assembly
counterclockwise to unlock and pull up on the cup
to remove it from the base
Step 3:
Flip the cup upright. Twist counterclockwise
to remove the blade base from the cup. Use the
finger tabs located on the interior of the bottom of
the blade base to help when twisting.
Step 4:
Wash all parts as instructed in the CARE AND
CLEANING section.
13