Switching Off; Checking The Blower; Checking The Controls; Operating The Blower - Stihl BGA 56 Notice D'emploi

10 Checking the Blower

9.2

Switching Off

► Release the trigger.
No air flows from the nozzle.
10 Checking the Blower

10.1 Checking the Controls

► Remove the battery, @ 8.2.
► Pull the trigger.
► If the trigger is stiff or does not spring back to its idle
position: Contact your STIHL servicing dealer.
The trigger has a malfunction.
► Fit the battery, @ 8.1.
► Pull the trigger and hold it there.
Air flows from the nozzle.
► Release the trigger.
No air flows from the nozzle.
► If air continues to flow from nozzle: Remove the battery
and contact your STIHL servicing dealer.
Blower has a malfunction.
BGA 56

11 Operating the Blower

11.1 Blow-Sweeping

► Hold and control the blower with one hand on the control
handle - wrap you thumb around the handle.
► Point the nozzle at the ground.
► Walk slowly and steadily forwards.

12 After Finishing Work

12.1 After Finishing Work
► Switch off the blower, @ 9.2.
► Remove the battery, @ 8.2.
► If the blower is wet: Allow the blower to dry.
► If the battery is wet: Allow the battery to dry.
► Clean the blower, @ 15.1.
► Clean the battery, @ 15.2.
English
37