Assembling The Blower; Removing And Fitting The Battery; Switching The Blower On/Off - Stihl BGA 57 Notice D'emploi

English
6.5 LED on Charger
The LED indicates the operating status of the
charger.
If the LED glows green, the battery is being
charged.
► If the LED flashes red: Rectify the malfunction.
Malfunction in charger.
7

Assembling the Blower

7.1 Mounting, Adjusting and
Removing the Nozzle
The nozzle can be mounted to the blower tube in
three positions to suit the height and reach of the
user. The positions are marked on the blower
tube.
► Switch off the blower and remove the battery.
1
2
► Line up the lug (3) and the slot (2).
► Push nozzle (1) into required position on
blower tube (4).
► Rotate nozzle (1) until it engages.
8 Removing and Fitting the
Battery
8.1 Fitting the Battery
1
2
► Insert the battery (1) in the battery compart‐
ment (2) and press it home until you hear a
click.
Arrows (3) on battery (1) are still visible and
battery (1) is held securely in battery compart‐
ment (2). There is no electrical contact
between blower and battery (1).
28
3
4
3
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages with a second click
and is flush with the blower's housing.
8.2 Removing the Battery
► Stand the blower on a level surface.
► Hold one hand in front of the battery compart‐
ment to ensure the battery (2) does not fall
out.
► Press the locking lever (1) with your other
hand.
The battery (2) is unlocked and can be
removed.
9 Switching the Blower
On/Off
9.1 Switching On
► Hold the blower with one hand on the control
handle - wrap your thumb around the handle.
► Push the release slide (1) in the direction of
the blower tube with your thumb and hold it
there.
► Depress the trigger lockout (2) with your hand
and hold it there.
You can let go of the release slide (1).
► Pull the trigger (3) with your index finger and
hold it there.
The blower accelerates and air flows from the
nozzle.
9.2 Switching Off
► Release the trigger and trigger lockout lever.
No air flows from the nozzle.
7 Assembling the Blower
1
2
1
2
3
0458-807-9621-B