Assembling The Blower; Inserting And Removing Activation Key; Inserting The Activation Key; Removing The Activation Key - Stihl BGA 45 Notice D'emploi

7 Assembling the Blower

7 Assembling the Blower
7.1 Mounting the Blower Tube and
Nozzle
► Switch off the blower and remove the activa‐
tion key.
2
3
1
4
► Line up the hole (2) and the lug (3).
► Push the nozzle (1) onto the blower tube (4).
The nozzle (1) engages audibly and can no
longer be removed.
► Line up the lug (6) and the slot (5).
► Push the blower tube (4) onto the housing (7).
► Rotate nozzle (4) in direction of
engages.
There is no need to remove the blower tube
again.
8 Inserting and Removing
Activation Key
8.1

Inserting the Activation Key

2
1
► Insert the activation key (1) in the socket (2).
8.2

Removing the Activation Key

► Stand the blower on a level surface.
► Remove the activation key.
► Keep the activation key out of the reach of
children.
9 Switching the Blower
On/Off
9.1 Switching On
► Hold the blower with one hand on the control
handle - wrap you thumb around the handle.
0458-719-9621-B
7
5
6
until it
► Push the release slide (1) in the direction of
the blower tube with your thumb and hold it
there.
► Depress the trigger lockout (2) with your hand
and hold it there.
You can let go of the release slide (1).
► Pull the trigger (3) with your index finger and
hold it there.
The blower accelerates and air flows from the
nozzle.
9.2 Switching Off
► Release the trigger and lockout lever at the
same time.
No air flows from the nozzle.
► If air continues to flow from nozzle: Remove
the activation key and contact your STIHL
servicing dealer.
Blower has a malfunction.
10 Testing the Blower and
Battery
10.1

Checking the Controls

Release slide, trigger lockout and trigger
► Remove the activation key.
► Attempt to pull the trigger lever without
depressing the release slide and the trigger
lockout.
► If the trigger can be pulled: Do not use the
blower and contact your STIHL servicing
dealer.
Release slide or trigger lockout is faulty.
► Push the release slide in the direction of the
blower tube with your thumb and hold it there.
► Depress the trigger lockout and hold it in that
position.
► Pull the trigger.
► Let go of the trigger, trigger lockout and
release slide.
English
1
2
3
23