Scope Of Delivery; Target Group; Intended Use; Technical Description - Dometic S16031 D Plus Instructions De Montage Et De Service

Scope of delivery

3 Scope of delivery
Quantity Description
1 D+ Active Simulator
2 Cable tie
1 Installation and operating manual
4

Target group

The electrical installation and setup of the device must be performed by a qual-
ified electrician who has demonstrated skill and knowledge related to the con-
struction and operation of electrical equipment and installations, and who is
familiar with the applicable regulations of the country in which the equipment
is to be installed and/or used, and has received safety training to identify and
avoid the hazards involved.
All other actions are intended also for non-professional users.
5

Intended use

The device is intended to simulate the D+ signal in vehicles where is no longer possible to pick up
from the alternator, for example Euro-6 vehicles.
This product is only suitable for the intended purpose and application in accordance with these
instructions.
This manual provides information that is necessary for proper installation and/or operation of the
product. Poor installation and/or improper operating or maintenance will result in unsatisfactory
performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:
• Incorrect assembly or connection, including excess voltage
• Incorrect maintenance or use of spare parts other than original spare parts provided by the man-
ufacturer
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
6

Technical description

The D+ signal is necessary to activate various additional devices (e.g. battery separator relay, AES
refrigerator, charging booster). The device is triggered by the engine vibration. When the engine
stops, the switching output turns off automatically.
8
D+ Active Simulator
EN