Publicité
en
S Remove drive cover (Fig. 4).
S Attach the continuous feed shredder to the
drive and rotate as far as possible in a clock
wise direction (Fig. 5).
S Place a bowl or plate under the outlet of the
continuous feed shredder.
S Select the recommended setting with the
rotary switch.
S Place ingredients which are to be processed
in the filling shaft and force down with the
pusher.
Warning!
Prevent the cut food from accumulating in the
outlet.
Tip: To ensure ingredients are cut uniformly,
process small amounts of thinly cut
ingredients.
Note: If the continuous feed shredder be
comes blocked with the ingredients which are
being processed, switch off the food proces
sor, pull out the mains plug, wait until the drive
has stopped, take the lid off the continuous
feed shredder and empty the filling shaft.
After using the appliance
S Switch off the appliance with the rotary
switch.
S Rotate the continuous feed shredder in an
anti clockwise direction and remove.
S Rotate the lid in an anti clockwise direction
and remove.
S Remove the disc and drive coupling.
S Clean the parts.
Cleaning and servicing
All parts of the continuous feed shredder are
dishwasher proof.
Tip: To remove the red coating after process
ing, e.g. carrots, pour a little cooking oil on a
cloth and wipe the continuous feed shredder
(not the cutting discs). Then rinse the continu
ous feed shredder.
Optional accessories
(Available from specialist outlets)
Whichever disc you are using, follow the
instructions in the Operation" section!
Chipper disc (a)
for slicing raw potatoes.
Attention!
The blades must be inserted face up.
Warning!
Add more potatoes only when the drive is at
a standstill.
S Place potatoes in the feed tube.
S Set the rotary switch to 3.
S Force down the potatoes with the pusher.
Grating disc, coarse (b)
for grating raw potatoes.
S Place potatoes in the feed tube.
S Set the rotary switch to 3.
S Force down the potatoes with the pusher.
Asiatic vegetable disc (c)
for cutting vegetables, potatoes, carrots, cel
ery or hard fruit into long, narrow strips.
Attention!
The blades must be inserted face up.
Warning!
Add more ingredients only when the drive is at
a standstill.
S Place ingredients which are to be processed
in the feed tube.
S Set the rotary switch to 4.
S Force down the ingredients with the pusher.
Grating disc, fine (d)
for grating hard cheese (e.g. parmesan).
Attention!
Add more hard cheese only when the drive is
at a standstill.
S Place hard cheese which is to be processed
in the filling shaft.
S Set the rotary switch to 4.
S Force down the hard cheese with the
pusher.
Potato fritter disc (e)
for grating potatoes to make potato fritters and
for slicing fruit and vegetables.
Attention!
When inserting the blade, ensure that the
required side is face up (grating/slicing).
S Place food which is to be processed in the
filling shaft.
Fig. 7
S Select setting 3 or 4 with the rotary switch.
S Force down the food which is to be
processed with the pusher.
Subject to alterations.
5
Publicité
