Maintenance; Installing Or Removing The Lid/Strainer Basket - Speck pumpen BADU SD Eco VS Fiche Technique

Pos : 100 /Tec hnisc he D okumentati on/Betri ebs anleitung/Wartung/Ins tandhaltung/allgemeine Anl eitung Wartung/Instandhaltung @ 1\mod_1428480782431_370.doc x @ 27443 @ 1 @ 1
8

Maintenance

N O T IC E

Before maintenance work, close all shut-off valves and drain
all pipes.
All pumps
When?
Regularly
If there is a chance of
frost
Additionally for pumps with plastic lanterns (AK version)
When?
Regularly
Prior to longer idle
periods

After completing all maintenance work, perform all necessary
measures for start-up. See chapter 6 on page 21.
Pos : 101 /Tec hnisc he D okumentati on/Betri ebs anleitung/Wartung/Ins tandhaltung/allgemeine Anl eitungDec kel /Saugsi eb demonti eren beziehungs weise montier en @ 1\mod_1428483024842_370.doc x @ 27458 @ 2 @ 1
8.1

Installing or removing the lid/strainer basket

Any lids and strainer baskets must be removed for work to be
performed. See 8.1 in the associated pump data sheet.
Pos : 102 /Tec hnisc he D okumentati on/Allgemeine M odul e/#### Seitenumbruc h #### @ 0\mod_1426069111812_0.doc x @ 891 @ @ 1
10|2015
What?

Clean strainer basket.

Drain pump and pipes sensitive
to frost before temperatures
drop below freezing.
What?

Remove salt crystals caused by
the salt water. See chapter 8.3
on page 27.

Rinse the pump with tap water
to prevent crystals from forming
on the mechanical seal.
Maintenance
EN 25