EN
Bubble Cleaning Mode
Bubble Fluid Reservoir
(rinse with clean water)
5
QUICK REFERENCE GUIDE
To clean the bubble mechanism with the Bubble Cleaning Mode:
1.
Unscrew the cap from the Bubble Fluid Reservoir.
2.
Place the In Hose in a container of clean water.
3.
Place the Out Hose where it can safely drain.
4.
Run the Bubble Cleaning Mode through the menu or
DMX.
5.
Thoroughly rinse the Bubble Fluid Reservoir.
6.
Restore the hoses and cap to the Bubble Fluid
Reservoir.
7.
The Hurricane Bubble Haze X2 Q6 may now be stored
until its next use.
NOTE: Use the Bubble Cleaning Mode after every use.
In Hose
(place in clean water)
Clean
Water
Haze Fluid Reservoir
(clean with FCQ)
Out Hose
(drains used fluid)
Drainage
Hurricane Bubble Haze X2 Q6 QRG Rev. 3