Chauvet DJ HURRICANE BUBBLE HAZE X2 Q6 Manuel De Référence page 4

EN
While operating the Hurricane Bubble Haze X2 Q6, make sure there is adequate fluid in the machine to
prevent pump and heater damage. When the fluid levels become low, simply add more fluids to
continue using the Hurricane Bubble Haze X2 Q6.
• NEVER store this product without cleaning out the bubble mechanism. See
• NEVER leave unused bubble fluid in the reservoir for an extended period. The fluid may thicken in
the reservoir and lead to damage or reduced performance.
Control Panel Description
Button Function
<MENU> Exits from the current menu or function.
UP navigates upwards through the menu list and increases the numeric value when in a function.
<UP/TIMER>
TIMER starts the timer controlled operation.
DOWN navigates downwards through the menu list and decreases the numeric value when in a function.
<DOWN/VOLUME>
VOLUME triggers the pump to modify the output volume.
<ENTER/STOP> ENTER enables the currently displayed menu or sets the currently selected value into the selected function.
STOP turns the fog output off.
Menu Map
Refer to the Hurricane Bubble Haze X2 Q6 product page on
Mode
Interval Set
Duration Set
Bubble Output
Haze Output
Fan Speed
CH1 LED Color
CH2 LED Color
CH3 LED Color
CH4 LED Color
Color Speed
DMX Address
Clean Mode
• For the Bubble Cleaning Mode, use clean water to rinse out the bubble mechanism.
• Through the display menu, the Bubble Cleaning Mode will run for 2 minutes before reverting to
standby.
Use the Bubble Cleaning Mode after every use.
3
QUICK REFERENCE GUIDE
www.chauvetdj.com
Programming Levels
5–200s
5–200s
OFF
ON
1–100%
1–100%
OFF
1–17
OFF
1–17
OFF
1–17
OFF
1–17
1–100
1–512
OFF
ON
Bubble Cleaning
for the latest menu map.
Description
Sets the interval between output
Sets the duration of the output
Bubble output off
Bubble output on
Haze volume, low to high
Blower fan speed, slow to fast
Disable the CH1 button on the WRC
Program CH1 on the WRC with LED color
option 1–17. See LED Color Options.
Disable the CH2 button on the WRC
Program CH2 on the WRC Wireless
Remote Control with LED color option 1–17.
See LED Color Options.
Disable the CH3 button on the WRC
Program CH3 on the WRC Wireless
Remote Control with LED color option 1–17.
See LED Color Options.
Disable the CH4 button on the WRC
Program CH4 on the WRC Wireless
Remote Control with LED color option 1–17.
See LED Color Options.
Adjust the color speed, slow to fast
Sets the DMX starting address
Turns the cleaning mode on or off
Hurricane Bubble Haze X2 Q6 QRG Rev. 3
Mode.