Fein ASCM12 Mode D'emploi page 16

OBJ_BUCH-0000000367-001.book Page 16 Thursday, February 14, 2019 2:50 PM
en
16
Mounting the drill chuck
Fig. 4
(ASCM12 (**)) (figure 4).
2.
When changing the drill chuck, avoid debris
from entering the drill chuck and the spindle!
Slide the ring toward the front.
Place the drill chuck onto the spindle.
Release the ring.
1.
Turn the drill chuck to lock it.
Drill chuck
Ring
3.
4.
Removing the drill chuck
Fig. 5
(ASCM12 (**)) (figure 5).
Ring
When changing the drill chuck, avoid debris
from entering the drill chuck and the spindle!
Slide the ring frontwards and pull the drill
chuck off the spindle.
1.
2.
Drill chuck