Jay J3 Carbon Manuel D'utilisation page 7

ENGLISH
Sunrise Medical recommends that a clinician such as a doctor
or therapist experienced in seating and positioning be consulted
to determine if a J3 Carbon Back is appropriate.
WARNING!
Backs should only be installed by:
• An authorized Sunrise Medical supplier.
• A qualified and competent healthcare professional who has
undergone appropriate certified training by either sunrise
medical or their approved supplier.
THE JAY J3 CARBON BACK INTENDED USE
The Jay J3 Carbon Back is intended to provide a back support
for a wide variety of wheelchair users. It is designed to provide
simple, comfortable and effective support to help maximise
function and increase sitting tolerance. In addition, it is light-
weight, durable and easy to use.
The back can be installed onto a wide range of wheelchairs.
Maximum user weight: 125 kg (275 lbs).
The intended lifetime of the back rest is 2 years.
WARNING!
Installing a back support on a wheelchair may affect the center
of gravity of the wheelchair and may cause the wheelchair to tip
backwards potentially resulting in injury.
Always assess for the potential need for anti-tippers or
amputee axle adapter brackets to be added to the wheelchair
to help increase stability.
WARNING!
Do not use J3 Carbon Back to push or lift wheelchair. Improper
use may cause the back to unexpectedly detach from the
wheelchair.
WARNING!
Do not use the J3 Carbon back handle to lift wheelchair. It is
intended only for back removal.
WARNING!
Carelessness causes fire.
WARNING!
Please read this manual before usage.
J3 Carbon Back 127048
J3 CARBON BACK
10mm Box End Wrench
Mid Thoracic (MT)
Cover
Posterior
Lower Thoracic
Fixed Mounting
Hardware
7
INTRODUCTION
4mm Hex Key
Shell
Foam
Base
Mid Thoracic
QR Mounting
Hardware
Rev.C