Maytag MDE20PDFGW Instructions D'installation page 25

Code Explanation
F1.Cr (Status) This will be displayed if machine is
connected to router but NOT connected with
Whirlpool server.
F1.CS (Status) This will be displayed if machine is
connected to router AND connected with Whirlpool
server.
Press the NORMAL key once to advance to next code.
F2.En uAP Setup Mode allows machine to connect to
Wi-fi via uAP. To begin connection process, connect
the device (laptop) that is being used to provision
the machine, to the MAC Address of the machine's
Wi-FI Module. Next, open a web browser and direct
it to the address 192.168.10.1. This will direct you
to the webpage needed to complete the connection
process.
F2.En This will be displayed if uAP provisioning is enabled
and machine is currently not connected to the
router or Whirlpool server (default).
F2.dS This will be displayed if uAP provisioning is disabled
and machine is currently not connected to the
router or Whirlpool server. In order to disable setup
via uAP press the DELICATES key 3 times.
F2.Cr (Status) This will be displayed if machine is
connected to router but NOT connected with
Whirlpool server.
F2.CS (Status) This will be displayed if machine is
connected to router AND connected with Whirlpool
server.
Press the NORMAL key once to advance to next code.
F3.dS WPS Setup Mode allows machine to connect to
Wi-fi via WPS.
F3.dS This will be displayed if WPS provisioning is
disabled and machine is currently not connected
to the router or Whirlpool server. This will also be
displayed if WPS connection not successful before
the WPS timer expired.
F3.En This and WPS countdown timer will toggle on the
display if WPS provisioning is enabled and machine
is currently searching for the router. Press the WPS
button on the connecting router to complete the
connection.
F3.Cr (Status) This will be displayed if machine is
connected to router but NOT connected with
Whirlpool server.
F3.CS (Status) This will be displayed if machine is
connected to router AND connected with Whirlpool
server.
Press the NORMAL key once to advance to next code.
F4 Signal Strength Mode allows machine to show
current signal strength of Wi-fi.
F4 Pressing the DELICATES key while on the F4 screen
will toggle between F4 and the signal strength in
dBm.
Press the NORMAL key once to advance to next code.
F5 Deprovision Mode allows machine to be
disconnected from Wi-fi.
F5 This will be displayed if no action is taken.
F5.dP This will flash on the display for 5 seconds while
the machine disconnects from Wi-fi. In order to
deprovision the machine press the DELICATES key
3 times.
Press the NORMAL key once to loop to beginning of this
menu.
CONTROLS SET-UP THROUGH USB
To access the USB setup menu, navigate to set-up code
2.xx (special pricing option). Pressing HEAVY DUTY keypad
activates the help mode sub-menu. The first sub-mode within
the help mode is USB option. Press HEAVY DUTY keypad at
any time to exit help mode.
Submode Description
USB While on this screen, press
the HEAVY DUTY button to
enter into USB menu. USB
menu allows for software
update and import/export
machine settings.
USB MENU
To access USB menu enter into Help Mode. While on the USB
screen press the HEAVY DUTY key. To advance through the
USB sub menu, use the NORMAL key. The DELICATES key
is the Select key. Press the HEAVY DUTY keypad at any time
to exit USB Menu. See Page 26 for location of the USB Port
on the appliance and instructions for how to install a USB
Stick onto the appliance and to remove a USB stick from the
appliance.
Code Explanation
U0.00 USB drive Inserted? (Status only)
U0.00 This will be displayed if USB drive is NOT
detected.
U0.01 This will be displayed if USB drive IS detected.
Press the NORMAL key once to advance to next code.
U1.00 Programming Mode
U1.00 This will be displayed if USB drive not detected.
U1.01 This will be displayed if USB drive is detected.
If you wish to reprogram the controls Press the
DELICATES key 3 times. Display will toggle
between U1.01 and ProG while programming in
process. Please wait until process is complete,
this could take several minutes. After software is
successfully downloaded to machine, the control
could take several minutes to reset. After reset
is complete the machine will return to customer
mode or service mode depending on Service
Switch status.
Err If the software programming was unsuccessful the
display will toggle between U1.00 and Err
Press the NORMAL key once to advance to next code.
U2.00 Export Machine Settings to USB Drive.
U2.00 This will be displayed if USB drive is not detected.
U2.01 This will be displayed if USB drive is detected. If
you wish to export machine settings to USB drive
press the DELICATES key 3 times. Display will
toggle between U2.01 and --.-- while export in
process.
donE Display will toggle between U2 and donE when
export finished successfully.
Err If the export was unsuccessful the display will
toggle between U2 and Err.
Press the NORMAL key once to advance to next code.
U3.00 Import Machine Settings from USB Drive.
U3.00 This will be displayed if USB drive is not detected.
Note
Allows user
to enter USB
menu. See USB
MENU section
for more info.
25