Maytag MDE20PDFGW Instructions D'installation page 24

Code Explanation
C. 20 VALUE OF COIN 2*
C. 20 This represents the value of Coin 2 in number of
$0.05 increments of the larger coin value. 20 x $0.05
= $1.00.
■ By pressing the HEAVY DUTY keypad, there
is the option of 1–199 in the quantity of $0.05
increments.
■ Press the NORMAL button once to advance to
next code.
COIN SLIDE OPTION
d.00
This option is either SELECTED 'ON' or NOT
SELECTED 'OFF'.
d.00 Not Selected 'OFF'.
d.CS Selected 'ON'. Press the DELICATES keypad 3
consecutive times for this selection. When coin slide
mode is selected, set 'b'. equal to value of slide in
nickels. Set Step '606' (regular cycle price) and '3.06'
(special cycle price) to number of slide operations.
NOTE: If the installer sets up 'CS' on a coin drop
model, it will not register coins.
Press the NORMAL keypad once to advance to next code.
E. 00 ADD COINS OPTION*
This option is either NOT SELECTED "OFF" or
SELECTED "ON." This option causes the customer
display to show the number of coins (Coins or Gen
1 Debit Pulses) to enter, rather than the dollars-and-
cents amount. The number in the display changes as
the coins are accepted.
Mode E allows you to change display to show how many
coins left to add to start cycle or the price to add for the cycle.
E. 00 Not Selected "OFF."
E. AC Selected "ON."
PR MODELS ONLY: In enhanced debit mode, this
option is not selectable.
■ Press the DELICATES button three consecutive
times to change this selection.
Press the NORMAL button once to advance to
■
next code.
PAYMENT MODE (COIN/DEBIT OPTION)*
J. Cd
J. Cd Both coin and debit selected. Press the DELICATES
button three consecutive times to change this
selection.
J. C_ Coins selected, debit disabled. Press the DELICATES
button three consecutive times to change this
selection.
Debit Card selected, coins disabled. Press the
J._d
DELICATES button three consecutive times to
change this selection.
J. Ed
Enhanced Debit is self-selected when a Generation
2 card reader is installed in the dryer. The Ed option
cannot be manually selected or deselected.
■ Press the NORMAL button once to advance to
next code.
24
Code Explanation
L. 00
PRICE SUPPRESSION OPTION
This option is either Selected 'ON' or Not Selected
'OFF'. This option causes the customer display to
show 'AVAILABLE' or 'ADD' rather than the amount
of money to add.
L. 00 Not Selected "OFF."
L. PS Selected "ON."
■ Press the DELICATES button once to change this
selection.
■ Press the NORMAL button once to advance to
next code.
CLEAR ESCROW OPTION*
n. CE
This option is either NOT SELECTED "OFF" or
SELECTED "ON." When selected, money held in
escrow for 30 minutes without further escrow or
cycle activity will be cleared.
n. 00 Not Selected "OFF."
n. CE Selected "ON."
■ Press the DELICATES button once to change this
selection.
■ Press the NORMAL button once to advance to
next code.
F0 WI-FI MENU - Access Wi-fi Menu by pressing the
HEAVY DUTY button while on the "F0" screen. The
Wi-fi Menu allows you to see Wi-fi connection status
as well as Wi-fi setup options. See the Wi-fi Menu
section for more information.
■ Press the NORMAL button once to advance to
next code.
WI-FI MENU
To access the Wi-fi Menu, perform step 1 of Activating the
Service Diagnostic Test Modes, and then perform step 3
until the F0 code is displayed. Pressing the HEAVY DUTY
key while on the F0 screen enters into the Wi-fi mode. To
advance through the Wi-fi sub menu, use the NORMAL key.
The DELICATES key is the Select key. Press the HEAVY DUTY
keypad at any time to exit Wi-fi Menu.
Code Explanation
F0.En Wi-fi Enable/Disable option. This is either selected
Enabled or Disabled.
F0.dS Wi-fi disabled. Press the DELICATES key 3 times to
disable Wi-fi.
F0.En Wi-fi Enabled. Press the DELICATES key 3 times to
enable Wi-fi.
Press the NORMAL key once to advance to next code.
F1.dS Connection Status Mode (Status only) allows user
to see machine's current Wi-fi connection status.
F1.dS (Status) This will be displayed if machine is not
connected to router.
*