Scheppach Bestcombi 3.0 Notice Originale page 132

Assembly of Under-Frame
For technical reasons associated with shipping and transport, the under-frame is not
mounted.
Mounting parts:
2 side plates
2 side plates with pins
2 stacking plates with rubber pad
2 mounting brackets
2 hexagon nuts M8
24 half-round screws M6 x 12
24 hexagon nuts M6
Assembly: fig. 1
Mount the 4 side plates by hand, using 16 half-round screws M6 x 12
and the hexagon nuts M6. (fig.1)
Place the under-frame on an even surface and tighten all screws firmly.
Make sure the side plates with the pins (A) are placed opposite to each other.
Now mount the stacking plates (B) to the under-frame using 4 screws for each and tighten the
screws firmly.
Fig. 2
Place the Bestcombi 2000 onto the under-frame so that the pins (A) click into place.
Attach the machine with the mounting brackets on both sides to the under-frame and tighten
them firmly using the hexagon nuts M8.
Fig. 1 Fig. 2
A
B
C