Panasonic CQ-VD7001U Manuel D'instructions page 25

Settings
(continued)
(INPUT/OUTPUT continued)
CAMERA SETUP
47
Rear View Camera set up
CAMERA
(Rear view camera set up)
Selection of the terminal that connects to the rear view
camera.
Preparation: Connect the reverse lead. ( a Installation
Instructions)
OFF : unconnected
ON : connected to the CAMERA-IN
default:
Note:
¡Make sure to select when no rear view camera is
OFF
connected.
SCALE (Rear view camera scale)
Images through the rear view camera can be shown in
scale display mode.
OFF : scale display off
ON : scale display on
default:
SCALE ADJUST (Scale adjustment)
] [
or : adjust
: Previous menu
[MENU] [MODE]
: Previous menu
48
CQ-VD7001U
MODE SKIP
Mode skip
VTR SKIP
(VTR skip)
If a VTR is not used, the VTR mode is skipped when chang-
ing the mode.
OFF : do not skip
ON : skip VTR
OFF
AUX SKIP (AUX skip)
If a AUX is not used, the AUX mode is skipped when
changing the mode.
OFF : do not skip
ON : skip AUX
INPUT SELECT
Input selection
OFF
NAVI INPUT
(Navigation Input)
RGB : connected to the RGB input cord, or a
car navigation system not connected
VTR : connected to the VTR-IN
CH VIDEO INPUT
(Video input for DVD Changer)
OFF : unconnected
VTR : connected to VTR-IN
CAMERA : connected to CAMERA-IN
Note:
¡The audio output should be connected to CH/AUX-IN.
: Quit : Select/adjust
[ENTER]
: Quit []] [[] [}] [{]
: Select/adjust
OUTPUT SELECT
Output Selection
REAR MONITOR
You can have different picture and sound on the front and
rear monitors at the same time.
Preparation: Connect another optional rear monitor.
(e.g. CY-VHD9500U)
AUTO
: same as front monitor
default:
OFF
DVD
: DVD/VCD/CD/MP3/WMA
VTR
: VTR
Note:
¡This menu can also be opened by touching/pressing and
holding /[MENU].
¡For CD/MP3/WMA, the screen becomes blue.
¡Images are not displayed on the rear monitor in the DVD
default:
OFF
changer mode even if
BACK GROUND CAMERA
This function allows the background camera view to be displayed
at the all times.
ON
: background camera view is always on the display.
OFF
: each mode image is on the display.
default: RGB
PAL/NTSC SELECT
PAL/NTSC selection
VTR
NTSC
: sets NTSC in accordance with the equipment
connected to VTR-IN.
PAL
: sets PAL in accordance with the equipment
connected to VTR-IN.
default: OFF
CAMERA
NTSC
: sets NTSC in accordance with the equipment
connected to CAMERA-IN.
PAL
: sets PAL in accordance with the equipment
connected to CAMERA-IN.
[MENU]
: Determine
USER SCREEN
FM SETUP
Setting for FM stations
NOISE SUPPRESSION
(Rear Monitor Set up)
AUTO
NARROW
(a Installation Instruction)
WIDE
AUTO PRESET
default:
AUTO
EACH
ALL
is selected.
AUTO
AM SETUP
(Always display background
Setting for AM stations
camera on the display)
NOISE SUPPRESSION
NARROW
MID
default: WIDE
OFF
(VTR terminal setting)
XM CATEGORY
Category setting
XM CATEGORY
ON
OFF
NTSC
default:
(Camera terminal setting)
Note:
¡ Channel selection while
the same category.
default:
NTSC
: Previous menu : Quit
[MODE]
: Previous menu : Quit []] [[] [}] [{]
RADIO
AUDIO DVD INPUT/OUTPUT
48
(FM IF filter switching)
: adjusted automatically
: narrows the frequency bandwidth to be
received to prioritize noise reduction.
: widens the frequency bandwidth to be
received to prioritize sound quality.
default:
AUTO
(Auto preset setting)
: saves the preset stations in each band.
: saves the preset stations in all FM lists regard-
less of band.
default:
EACH
(Noise suppression)
: narrows the frequency bandwidth to be
received to prioritize noise reduction.
: goes between NARROW and WIDE .
: widens the frequency bandwidth to be
received to prioritize sound quality.
default:
MID
(Category setting)
: enables category switching
: disenables category switching
default:
OFF
is set is performed within
ON
(a page 37)
: Select/adjust
[ENTER]
: Select/adjust : Determine
49
CQ-VD7001U