RK Rose+Krieger RKPowerlift M Notice D'assemblage page 35

Sources for the harmonised standards according to article 7, paragraph 2:
EN ISO 12100
EN 61000-3-3:2088: Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage
EN 61000-3-2
EN 55011
EN 55014-1
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
Places where the applied other technical standards and specifications were found:
ÖVE / ÖNORM EN 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety
The manufacturer or the person authorised are obliged to hand over the special documents for
the partially completed machine to the national authorities on reasoned request. This
transmission is carried out electronically.
The commercial protective rights remain unaffected by this!
Important note! The partially completed machine must not be put into operation, until, if
required, it has been determined that the machine in which the partially completed machine is to
be installed complies with the regulations of this guideline.
Minden / 22/02/2017
Location / Date
Minden / 22/02/2017
Location/Date
The latest edition of the EU declaration of incorporation is available for download at www.rk-
rose-krieger.com.
Safety of machinery – General principles for design – Risk assessment and
risk reduction (ISO 12100:2010)
changes, voltage fluctuations and flicker in public low-voltage supply sys-
tems, for equipment with rated current <= 16 A per phase and not subject
to conditional connection (IEC 61000-3-3:2013)
Electromagnetic compatibility (EMC) – Part 3-2: Limits - Limits for harmonic
current emissions (equipment input current <= 16 A per phase)
Industrial, scientific and medical equipment - Radio-frequency disturbance
characteristics
Electromagnetic compatibility
ESD
Radiated, radio-frequency, electromagnetic field immunity test
Interference immunity burst mains inlet
Surge immunity test
Immunity to conducted disturbances
Magnetic field immunity test
Voltage dips, short interruptions and voltage variations immunity tests
and essential performance (IEC 60601-1: 2005).
Signature
Signature
1. Declaration of incorporation
Technical Manager
Signatory's position
CEO
Signatory's position
35