Declaration Of Incorporation - RK Rose+Krieger RKPowerlift M Notice D'assemblage

1. Declaration of incorporation

1.1 Declaration of Incorporation
As set out in Machinery Directive 2006/42/EC, Annex II, 1.B for partly completed machinery
Manufacturer
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden, Germany
Description and identification of the partly completed machine.
Product/manufacture:
Type:
Serial number:
Project number:
Order:
Function:
The following basic requirements of Machinery Directive 2006/42/EC are applied and fulfilled:
1.1.5.; 1.2.3.; 1.3.2.; 1.3.3.; 1.3.4.; 1.3.7.; 1.3.8.; 4.1.2.3.
Moreover, we declare that the special technical documents have been created according to
Appendix VII Part B.
The manufacturer declares explicitly that the partially completed machinery meets all the relevant
provisions of the following EC directives:
2011/65/EC
2014/30/EU
34
The person in the community that is authorised to compile the
relevant technical documents.
Michael Amon
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden, Germany
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
electro-motorised extracting and retracting of the inner profile for suitability
of a linear movement.
Directive 2011/65/EC of the European Parliament and of the Council of 8th
June 2001 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment. 2001 on the restriction of the use of
certain hazardous substances in electrical and electronic equipment.
Directive 2014/30/EU of the European Parliament and of the Council of 26
February 2014 on the harmonisation of the laws of the Member States re-
lating to electromagnetic compatibility (new version)