Publicité
Les langues disponibles
Les langues disponibles
English
General information about the system
•
When an AC 230V power outage occurs, the system will continue to run
on the internal battery for several tens of minutes.
•
Low battery: When the built-in battery is low, you will receive a notification
on the control panel screen. Connect the included power cord and move
the switch to ON to charge the battery.
•
Discharged sensor battery: Each wireless sensor added to the system has an
internal battery. The system detects the status of the sensor batteries and
displays the message "Sensor Low Battery" if the batteries are discharged.
Replace the respective sensor batteries.
•
Tamper: When a Tamper action has been detected (attempt to manipulate,
destroy the control panel), the system generates an alarm.
SMS or voice call notification in case of alarm
When an alarm is triggered or a system problem occurs, an SMS notification
or a voice call will be sent to the phone number that was saved in the system.
After answering the call, you will hear the voice message previously recorded in
the system and you will be vocally notified of the location where the alarm was
triggered.
Next, you will hear the message: "Press 1 to arm, press 2 to disarm, press 3 to
monitor, press 4 to speak".
If you have confirmation that it is a false alarm, press 1 to cancel the ongoing
alarm.
28
28
Publicité
