PNI SafeHouse HS650 Manuel Utilisateur page 23

43 Initialization of
parameters
46
Query SMS and beep settings in case of
arming/disarming and alarm.
In the answer received:
1 is On
0 is Off
62 Query system settings
94 Set time zone
Set phone number via SMS
Command Function
51 1st phone number
52 2nd phone number
53 3rd phone number
54 4th phone number
55
5th phone number
Syntax of the message to be sent:
*System password*Command107xxxxxxx,A,B*Command207xxxxxxx,A,B*
The * symbol marks the beginning and end of the syntax and is also used as a
separator between commands.
07xxxxxxxx, A, B
In this string:
07xxxxxxx represents the phone number (up to 18 digits)
A used to enable (1) or disable (0) the voice call in case of alarm
B used to enable (1) or disable (0) SMS notification in case of alarm
Reset parameters.
Remote controls,
sensors and RFID
TAGs added to the
system remain
+8
23
23
English
*6666*43*
*6666*46*
*6666*62*
*6666*94+2*