PNI SafeHouse HS650 Manuel Utilisateur page 16

English
lock the keyboard if no operation is performed for 30 seconds. To activate the
keyboard, you must enter the user password.
3. Keys backlight: If the function is deactivated, the key backlights turn off
after 30 seconds if no operation is performed.
4. Open door/window warning: If the function is enabled, the system will
generate an warning notification when you open a door or window after the exit
time has elapsed.
5. System password: used to unlock the keypad and make remote settings via
SMS.
6. User password: used to unlock the keypad, as a prefix for remote settings via
SMS and notification for alarm text.
7. Language: the voice prompts and the notification will be in the selected
language. After selecting the desired language, the panel will restart.
8. Initialization: All customized parameters will return to factory defaults and
all paired sensors will be deleted.
Configuration
Power the control unit
Connect the power adapter in the package to the 5V micro USB port and move
the backup battery switch to the "ON" position.
WiFi communication through the integrated module
If your system is configured to report alarms and accept remote control via the
mobile application, the wireless router the alarm system is connected to must
always be on and connected to the Internet.
GSM/4G WiFi communication through the integrated module
If your system is set up to report alarms, receive settings via SMS, or make voice
calls, make sure a SIM card is installed (see image below) and the control panel
is connected to the GSM/4G network. Disable the PIN to the SIM card before
adding it into the unit.
16
16