PNI SafeHouse HS650 Manuel Utilisateur page 19

Delete all sensors
• In the main menu, select: Parts->Detector
• Touch the icon
• Press the √ key to confirm.
Add/Delete RFID TAGs
Add new TAG
• In the main menu, select: Parts-> RFID
• Touch the icon
• The message Synchronising appears on the screen. The system enters
pairing mode and counts down the remaining pairing time (max. 20 sec.).
• Move the TAG closer to the RFID area marked on the control panel.
• The screen will display Device code has been learnt if the TAG was
successfully paired.
Delete TAG
• In the main menu, select: Parts-> RFID
• To delete a TAG, Touch the icon
• Press the √ key to confirm.
Delete all TAGs
• In the main menu, select: Parts-> RFID
• Touch the icon
• Press the √ key to confirm.
Pairing a wireless siren
• Switch the siren to pairing mode (see the siren user manual). Note: The
wireless siren is not included in this package. Compatible product: Wireless
outdoor siren PNI SafeHouse HS007
• In the main menu, select: Parts->Siren Learn
• The system sends a signal to the siren. The message Learn signal sent
appears on the screen. The wireless siren will confirm pairing with an audible
or visual signal (see the siren user manual).
to delete all sensors.
to add a TAG
to delete all TAGs.
19
19
next to the TAG you want to delete.
English