Télécharger Imprimer la page

Brune B 300 Electronic Manuel D'instruction page 11

Publicité

Les langues disponibles

Les langues disponibles

Dear Customer,
thank you for having chosen the Humidifier B 300. Please read the operating instructions carefully before using your new unit. We recommend
that you keep the instructions in a safe place, so you may refer to them when needed.
Principle of operation
With this unit, you have purchased a highly effective humidifier and air purifier that offers you all the advantages of today's high-tech applian-
ces. With the proper humidity level, you are not only protecting your health, but also prevent damaging of valuable furnishings, storage goods
or prevent product loss when humidity-sensitive production processes are involved. The unit is operated with regular tap water and functions
completely free of condensation. The minimal power consumption makes it an environmental friendly device.
The Humidifier B 300 works on the principle of natural evaporation. Thereby, the humidifying and purifying process works as described in the
following:
The B 300 draws in the air through an air suction opening on the side of the power cable and passes it through an air filter, which filters out the
larger dust particles and fine particles. In the inner chamber of the humidifier, the drawn-in air is treated with germicidal UVC rays and than
passed on to the evaporation filter. The evaporation filter, which continuously glides through the water bath, produces with its special struc-
ture a large evaporation surface. This causes the air to be cleaned one more time. After the humidification and purification, the air is returned
back into the room. The Humidifier B 300 thereby works based on the principle of circulating air, meaning that air in a closed room is drawn
in, cleaned, and moistened time after time until the humidity level set has been reached. The measuring of the room humidity thereby takes
place through a humidity sensor with a 2 meter cable. Displaying of the room humidity and the setting of the desired humidity takes place
through the operating display. This is where you can also regulate the fan speed.
Humidifier B 300 offers a combined function – it cleans, purifies, and humidifies the air. If only the humidifying function is needed, the air
purifying function can be reduced by removing the air filters in the suction area, which, however, does lead to a considerable increase of the
evaporation performance. The function of the UV-lamp remains in the operating mode.
We hope that you enjoy your Humidifier B 300 unit.
3-module structure
1.
Module
housing
Safety Instructions / Warning
The unit may be operated only by authorized persons.
Never operate an appliance with defective power input.
Make sure that electrical parts do not come into contact with water.
The appliance is not exposed to influence of the weather (rain, snow, frost); also do not operate the unit with wet hands.
The unit is set up stable and horizontally onto the ground.
When absent for a longer time, always pull the power supply plug or ensure that the power supply is disconnected.
Before cleaning, always first pull the power supply plug.
Never pull the unit or the power cable at the power inlet, when pulling the power supply plug out of the socket.
Never move the unit in a filled condition. Water can exit and cause damages to the unit or furnishings.
Service work, for which tools have to be used, may only be performed by the authorized personnel.
The humidifier B 300 is exclusively meant to humidify the ambient air in private surroundings.
Not intended to be used in healthcare premises!
2.
With zipper,
easy to remove
filter mat
Module
technical element
11
ENGLISH
3. Module water reservoir
ATTENTION!
Additional safety instructions / warning on page 18

Publicité

loading