Publicité
Les langues disponibles
Les langues disponibles
Skip/Search mode (skip/search up
1. During play or pause mode, if "Skip Up" Button (1) is pressed. It will go to next track and then remain the
play or pause mode.
2. During play or pause mode, if "Skip Down" Button (1) is pressed. It will go back to the beginning of the
track and remain the play or pause mode.
3. After step 2, press "Skip Down" Button (1) again will go to the previous track and remain the play or pause
mode.
4. If press and hold the "Skip Up/Down" button (1) during playback, the playing track will go fast forward or
backward until the button being released.
Folder up control
Press "Folder Up" Button (15), the system will go to play next folder
1.
Remark:
-
The system can detect and read the file under MP3 format only though the USB port.
-
If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format, some MP3
player may not be able to play via the USB socket. This is not a malfunction of the system.
MP3 track format requirement:
- MP3 bit rate : 32 KBPS~256 KBPS.
Repeat/Random mode
Press the Repeat/Random Button (3) before or during playback, a single track, single folder or all the tracks can be
played in different mode ass follow :
PLAY MODE
REPEAT SINGLE TRACK
REPEAT SINGLE FOLDER
REPEAT ALL TRACKS
RANDOM MODE
OFF MODE
Repeat play
You can listen the desired track, folder or all tracks repeatedly by this function.
Random play
You can listen all the tracks in a random order by this function.
The system is able to encode the Phono to MP3 format and recording at memory media with USB connecting port.
(support maximum up to 2GB memory size).
A) Phono encoding
1. Set the Function knob (7) to "Phono/Aux" made and then press " Rec" Button (5).
2. The Record LED indicator (4) will light few second, then flashing. Now the system was ready to encoding.
3. Start playback at Phono of the track which you want to recording to USB.
4. After finish of recording, press the " Rec" Button (5) again during recording mode.
REMARK:
-
The recording speed is 1:1 and according to the actual playing time of the record.
The system will create a "AUDIO" folder and then store the encoding track in it.
-
The recording format is preset at – MP3 bit rate : 256 KBPS.
-
To interrupt the recording, press the " Rec " Button (5) again during recording mode.
-
B) Aux encoding
1. Connect the unit to other device by connecting the Aux in jack (18)
2. Set the Function knob (7) to "Phono/Aux" made and then press " Rec" Button (5).
3. The Record LED indicator (4) will light up few second, then flashing. Now the system was ready to
encoding.
4. Start playback your external device to recording to USB.
5. After finish of recording, press the " Rec" Button (5)again during recording mode.
/ skip/search down
REP/RAN LED INDICATOR STATUS
FLASH IN RED COLOR
FLASH IN GREEN COLOR
LIGHT UP IN RED COLOR
LIGHT UP IN GREEN COLOR
-----------------
ENCODING OF PHONO / AUX INTO MP3 FILE
PL550BR / English Instruction Manual
)
4
Publicité
