Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4. Put the dry nozzles back in.
5. Tighten the screws to the housing cover.
6. Check for leaks where needed.
Also, watch the video on our homepage. Regularly inspect for solid and proper
seating of all gas-transmitting parts, such as hoses, valves, ignition electrodes and
thermocouples inside the combustion chamber.
Your Beefer does not have wear parts or parts which are subject to continuous
wear in this sense. If there is damage, contact your dealer or the manufacturer.
Transport
Observe the following points if you would like to transport your Beefer:
1. Ensure that the Beefer is switched off and has cooled down.
2. Ensure that the valve on the LPG bottle or the valve to the gas connector is
closed and remove the gas lines from the Beefer in order to avoid tensile forces.
3. Remove all loose parts, such as the grate and the tray from the Beefer.
4. Ensure that accessories are secured and cannot be damaged.
5. Transport the Beefer only in its original packaging.
6. Please observe Chapter 5, Set-up, when setting up your Beefer again.
46
Publicité
Table des Matières
