Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5
SET-UP
Proceed as follows:
1. With a second person, lift the Beefer with the transport belts out of the
packing. Store the packaging and transport belts.
ATTENTION:
control knob for gas feed, on the ignition button or gas connection. Also, do not
carry it on its height adjustment appliance.
2. With a second person, carefully carry the Beefer with the provided transport
belts (see image below) to the desired location.
3. Carefully set the Beefer at the desired place in order to not damage the
ceramic burner plate.
4. Set the Beefer with its front edge flush to the table edge.
If you would like to transport the Beefer to another place after use, note the
instructions in Chapter 11, Care, Transport and Storage.
The handling, storage and transportation of all sizes of LPG bottles must be in
accordance with Storage and Handling of Liquid Petroleum Gases, NFPA 58 or
Natural Gas and Propane Installation Code, CSA B149.1.
Please note that the appliance is not designed as a built-in device.
36
Damaging hazard! Never carry the Beefer from the back, on the
Publicité
Table des Matières
