Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10 PROBLEMS AND SOLUTIONS:
PROBLEM
POSSIBLE CAUSE
The appliance
LPG bottle still closed
cannot be ignited
natural gas connection is not
open/coupling is not correctly
clicked in
LPG bottle empty
gas lines or pressure regulator
are not continuous, not tightly
connected, kinked or pinched
control knob for gas feed
not in the high position
intake tract
from insects
ceramic burner plate
The appliance is
nozzle
burning, but too
little
ceramic burner plate
deposits
ceramic burner plate
broken, such as through
improper transport
intake tract
such as by insects
is
blocked, such as
wet
dirty
has fat
is
blocked,
ASSISTANCE
open the valve on the LPG
bottle
correctly connect the coupling
and open the valve on the gas
connector
replace the LPG bottle
ensure that the installation is
correct; if necessary, replace the
pressure regulator or gas lines
move the control knob for gas
feed
to the 'high' position,
then press it down
clean the intake tract
press a dry cloth carefully
under the ceramic burner plate
clean the nozzle
allow the appliance to burn
without grilled items at
maximum level for about
15 minutes.
contact your Beefer dealer
clean the intake tract
43
Publicité
Table des Matières
