Mechanical System - Festo Robotino 4.0 Notice D'utilisation

Risk of explosion and fire!
Make sure that the rechargeable batteries are never short-circuited.
•
Establishing and interrupting electrical connections
–
–
•
Use safety extra-low voltage (SELV) only: max. 24 V DC.
Ground the Robotino
housing without touching any electrical components and watch out for electrostatic
discharge.

6.3 Mechanical system

•
Carry Robotino
•
Mount all components securely to the chassis or the mounting fixtures intended for
this purpose.
•
Only reach into the Robotino
standstill.
•
Always position the command bridge vertically so as not to damage the raised pin
contact.
•
Secure the load before carrying out any work on the assembly tower.
© Festo Didactic 8101524
Electrical connections may only be established in the absence of voltage.
Electrical connections may only be interrupted in the absence of voltage.
NOTICE
® 4.0 housing ("command bridge") before opening it. Remove the
®
4.0 by the handles in order to transport it.
®
WARNING
CAUTION
CAUTION
4.0 mobile robot system when it is at a complete
®
Robotino 4.0 Mobile Robot System
43