Installation; Installation, Mechanical - Festo HGPLE Serie Notice D'utilisation

HGPLE
5

Installation

5.1

Installation, mechanical

• If possible, use short and lightweight gripper fingers (
Mounting the gripper fingers
1. Press 2 centring sleeves 7 into the fitting holes of
each gripper finger (
2. Use the centring sleeves to position the gripper fingers
on the gripper jaws.
3. Secure the gripper fingers to the gripper jaws by using
3 mounting screws each (
4. Tighten the mounting screws with the corresponding
tightening torque (
Size
Mounting screws
Tightening torque
Centring sleeves 7 (included in scope of delivery) ZBH-5
Tab. 1
20
Tab. 1).
Tab. 1).
Tab. 1).
[Nm]
www.festo.com/catalogue).
Fig. 2
14
M3
1.2
Festo – HGPLE – 1405a English
7
25
M5
6.0
ZBH-7