Safety Notes; Important Notes; Functions; Spare Parts - LGB Feuriger Elias Serie Mode D'emploi

Safety Notes

• This model may only be used with the operating system
designed for it.
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This model may only be supplied with power from a
suitable power generation source.
• Pay close attention to the safety notes in the instructions
for your operating system.
• Not for children under the age of 15.
• WARNING! Sharp edges and points required for operation.

Important Notes

• The operating instructions are a component part of the
product and must therefore be kept in a safe place as
well as included with the product, if the latter is given to
someone else.
• Please see your authorized LGB dealer for repairs or

spare parts.

• http://www.maerklin.com/en/imprint.html

Functions

• This model is designed for operation on LGB two-rail DC
systems with conventional LGB DC train controllers or
power packs (DC, 0 - 24 volts).
• This model comes from the factory with a built-in multi-
train system decoder (multi-train system).
• For operation with the Multi-Train System, the model is
programmed to loco address 03.
Note: Use a locomotive controller with more than 1 amp of
train current for this model.
8
Mode of Operation Switch
There is a 3-position mode of operation switch in the loco-
motive (Figure 1).
Pos. 0 Locomotive stored on the track without power
Pos. 1 Power to motor and lights
Pos. 2 Same as Position 1
Multi-Purpose Socket
The model has a "flat" multi-purpose socket, with a
removable cover, on the rear wall (Figure 3) on the front and
the rear of the locomotive. If you are equipping a car with
interior lighting or with a sound effects module, you can
connect it to one of the sockets and power that circuit with
track voltage. Both of the sockets have a cover.