Mounting The Wall Controller - BIG ASS FANS Isis Guide D'installation

30

Mounting the wall controller

A wall controller is provided only with fans sold in the United States, Canada, and Saudi Arabia. Customers outside of
these countries must supply a lighting dimmer rated for incandescent loads only.
WARNING: Disconnect power to the junction box before wiring the fan controller.
Select a mounting location from which the fan is visible. Install the controller on a flat surface that is readily accessible, free from
vibration, and where there is adequate distance from foreign objects or moving equipment. After wiring the controller, insert and tighten
two (2) screws. DO NOT overtighten.
Electrical Installation (cont.)
Controller
WWW.BIGASSFANS.COM ©2014 DELTA T LLC
Isis
®
Front Plate
ALL RIGHTS RESERVED