Fasten Wood Framing Channels (To Brackets) - BIG ASS FANS Isis Guide D'installation

4. Fasten wood framing channels (to brackets)

CAUTION: The center-to-center distance between the two beams or joists between which the fan will hang cannot be
greater than 24" (61 cm).
Fasten the wood framing channels to the brackets using the Wood Frame Mounting Hardware as shown. Torque to 25 ft·lb (33.9 N·m).
See the appropriate illustration for your specific mounting structure.
Wood Frame Mounting Hardware (BAF-Supplied):
a. (2) Wood Framing Channel
b. (4) 3/8"-16 Spring Nut
c. (4) 3/8" Flat Washer
d. (4) 3/8"-16 x 7/8" Bolt
*Mount the brackets either flush with the tops of
the beams or toward the middles of the beams as
shown above.
Mounting Structure: Wood Frame (cont.)
Floor Joists
a
WWW.BIGASSFANS.COM
Isis
®
Vaulted Ceiling Beams
b
c
d
©2014 DELTA T LLC ALL RIGHTS RESERVED
a
c
d
Ceiling Joists
a
b
c
d
17
b