3 Operation
3.4 Switching off the appli-
ance and retracting the
power cord
20
1
3.5 Transport and storage
21
22
1
1. Switch the appliance off via the on/off switch (Fig. 20/2)
and unplug the plug from the mains socket.
2. Keep the plug in your hand.
2
WARNING:
Danger of injury! During uncontrolled retraction, the
power cord can whip around, become a tripping hazard
or knock over objects. Therefore, keep the plug in your
hand and guide the cord when retracting it.
3. Push the cable retraction button (Fig. 20/1) to retract
the power cord. Guide the power cord with the plug in
your hand during retraction.
To transport the cylinder vacuum cleaner, you can car-
ry it by the carrying-handle (Fig. 22/1).
To store it or when not working with it you can hook the
parking/storage hook onto the parking bracket (Fig. 21).
It is recommended to first retract the telescopic tube.
WARNING:
Danger of injury! Switch off the appliance when not work-
ing with it and observe the notices under
'Switching off the appliance and retracting the power
cord'.
For storing you can hook the parking/storage hook into
the storage bracket on the bottom of the vacuum clean-
er (Fig. 22). It is recommended to first retract the tele-
scopic tube.
ATTENTION:
Never store the appliance next to heat sources
(e.g. stoves or radiators). Avoid exposing it to direct sun-
light. Heat can damage the appliance.
For prolonged storage replace the dust filter bag with
a new one
Always store the appliance in a cool, dry place and out
of reach of children.
Chapter 4.1, 'Changing the dust filter bag'.
Chapter 3.4,
35