Switching Off And Retracting The Power Cable; Storage - Dirt Devil Classic Mode D'emploi

3.2 Switching off and
retracting the power
cable
1

3.3 Storage

2
1
2
1. Switch off the cylinder vacuum cleaner using the on/off
switch (Fig. 14/1) and pull the plug out of the socket.
2. Take the plug in your hand and hold it firmly.
The power cable can whip around when being pulled in,
it can also trip you or somebody else up or knock down
objects.
3. Press the cable retract button (Fig. 14/2) to pull in the
2
power cable. Guide the last part with the plug by hand.
Fig. 14
For storage or during work breaks, you can use the
parking hook mount (Fig. 15/1) to hook the parking hook
(Fig. 15/2) onto the floor nozzle (Fig. 15).
If you leave your work area, switch off the appliance and
observe the instructions under
off and retracting the power cable". This will help avoid
accidents.
Fig. 15
When putting away the vacuum cleaner, you can also
use the stow-away hook mount (Fig. 16/1) on the underside
of the cylinder vacuum cleaner. This is where you can hook
the stow-away hook (Fig. 16/2) onto the telescopic tube
(Fig. 16).
Never position the appliance directly against heat
sources (e.g. heating, oven). Avoid direct sunlight. Heat
1
Fig. 16 can damage the appliance.
If you want to store the appliance for a longer period of
time, remove the dust bag and the filters. Store the
appliance in a cool, dry room.
WARNING:
WARNING:
ATTENTION:
Operating
Chapter 3.2, "Switching
31